Magura HC3 Radial Brake Master Cylinder 18mm (DOT) 2100299

Machined Aluminum body this master cylinder body has been produced from high grade aluminum alloy to ensure a lightweight design combined with maximum rigidity which has been built to last90 Degree radial design pushrod and cylinder at right angle to handlebars results in decreased friction and more direct brake feeling for improved controlFull ABS compatibility MAGURA "HCT" is approved for continuous use with all ABS systems without loss of performance due to pressure compensation (ABS-Kickback)(status 01.2016)3-way lever ratio the hand activated master cylinder lever has a clever 3 way adjustable point of support. This mimics the effect of using a piston size 1mm below and above the selected hydraulic ratio. Simply remove and reposition the lever support retaining bolt for a softer or harder pressure point. All 3 positions offer 90 Degree full radial activationFolding lever blade reduces the force exerted on the master cylinder body in the event of a fall over. This will increase the possibility to continue riding following a fall over incident.Advanced secondary seal technology the rear piston seal has been specially designed to prevent the introduction of air through secondary seal ingress. The advanced x-ring seal design will reduce or eliminate this problem common on racing motorcycles at higher RPMReservoir mount the master cylinder is supplied with an external reservoir mounting bracket designed to use minimum space and with smoked glass to optically determine the level and condition of the brake fluid at all times Titanium retaining bolts lever and clamp retaining bolts are higher grade titanium saving weight while remaining strong and durable